How to use the FNA autoclicker

Welcome to the FNA autoclicker tutorial.

You will find in this article all the technical part which will explain everything you need to know to use it. For the theoretical part which deals with the trading strategy, please consult : “How to trade an economic event with FNA“.

• Configuration in progress : FNA waits for you to complete each step until monitoring of current values is started.
• Monitoring in progress : FNA monitors the publication of the selected current values

Once the current values have been published on the economic calendar, there are two possibilities :

• Click made : the current value (s) fell into the triggering intervals and FNA therefore made the buy or sell click.
• Missed interval(s) : at least one of the current values has missed its triggering interval and FNA has therefore made no click.

 

Operating principle of the FNA autoclicker :

FNA is software that is used to open a buy or sell position as quickly as possible by simulating a mouse click based on the results provided by economic calendars. If the value of the ad displayed by the calendar is within your trigger interval, then FNA will simulate the corresponding click.

At the moment, only one version of FNA is available for Windows. If you are using another operating system, you can currently install a virtual machine on your computer to install Windows on it. You can find Windows 10 licenses for less than € 10.

 

Launch of the FNA autoclicker :

 

 

• Administrator rights :

You need to launch FNA with administrator rights because the browser integrated in FNA needs to be emulated in Microsoft Edge 11 mode. Without these rights, FNA cannot open a registry key and the display of economic calendars will be very compromise.

If FNA does not have these rights, you will see the following error message, and FNA will close 5 seconds later :

You will therefore have to restart the program by right-clicking on the icon, then choosing “Run as administrator”.

FNA can then open a registry key in one of the following two directories, depending on the architecture of your Windows:

• • For Windows 64 bits : HKEY_LOCAL_MACHINESoftwareWow6432NodeMicrosoftInternet ExplorerMainFeatureControlFEATURE_BROWSER_EMULATION
  • For Windows 32 bits : HKEY_LOCAL_MACHINESoftwareMicrosoftInternet ExplorerMainFeatureControlFEATURE_BROWSER_EMULATION

 

• FNA version checker :

Once launched, FNA automatically checks that its version is up to date. If necessary, FNA will redirect you to the download page so that you can download the latest version. You can then delete the version that has become obsolete.

 

• Internet connection check :

At startup, FNA will test if it has Internet access and will inform you by a message in the top left:

• • If FNA has access to the Internet: “Internet connection OK”
  • If FNA does not have Internet access “Please check your Internet connection / Vérifiez votre connexion Internet”.

 

• Terms of Use :

You must accept the 4 conditions of use (without reservation) of the software to be able to use it by checking each of them. If you refuse one of them, you will not be able to use FNA. There is no obligation.

 

• Choice of language :

Once the 4 conditions of use have been accepted, you can choose the choice of language. FNA is currently only translated into French and English. Other languages can be added as needed. Let me know in a comment if you want more translations.

 

Configuration of the autoclicker :

The configuration is done through 6 quick and simple steps to perform. It should be noted that:

• Each completed step therefore access to the next step.
• If you return to a previous step, all the steps that were completed after this one will be reset.

The remaining steps are noted “to do”, the step in progress is said to be “in progress”, and once the step has been completed, it is noted “OK”.

 

In this tutorial, we will choose 4 ads to watch with the DailyFX.com calendar

1. Step 1 : choose the economic calendar :

FNA offers 4 different calendars, you choose the one that best suits you from the drop-down list. I offer a little comparison here:

• • DailyFX
  • FXCM
  • Forexlive
  • Investing

Once the calendar has been chosen, the browser integrated into FNA is displayed so that you can establish your strategy.

 

2. Step 2 : choose the number of economic announcements to watch :

FNA can monitor up to 4 events (at the moment) simultaneously. You just have to check 1,2,3 or 4

 

3. Step 3 : indicate the location of the events to monitor :

Now you have to tell FNA where the expected values ​​will be displayed on the browser. It is therefore necessary to place the mouse at the place where the value to be monitored should appear and then to press:

• The key “1” or “a” on your keyboard so that FNA saves the location of the value at monitored number 1, the location then takes the color magenta.
• The key “2” or “b” key on your keyboard so that FNA saves the location of the value to be monitored number 2, the location then changes to orange.
• The key “3” or “c” key on your keyboard for FNA to save the location of the value to be monitored number 3, the location then takes the color yellow.
• The key “4” or “d” key on your keyboard for FNA to save the location of the value at monitored number 4. the location then changes to green.

Of course, if you choose only 2 ads to monitor, you only need to indicate 2 locations (magenta and orange).

 

4. Step 4 : set trigger intervals :

This is where you determine the trigger intervals. If the current value given by the calendar falls within this range, then this will trigger the click.

So if you choose to monitor several ads, it will be necessary that :

• All of the values ​​fall within their corresponding purchase interval to trigger the PURCHASE CLICK.

In the example above with 4 monitored values, to trigger the purchase click, the following 4 conditions must be met:

• • The value 1 must fall between -3.7 and 1000.
  • And the value 2 must fall between -3.1 and 1000.
  • And the value 3 must fall between -0.1 and 1000.
  • And the value 4 must fall between 0.4 and 1000.

If one of the values ​​misses its interval, the click will not be triggered.

• All of the values ​​fall within their corresponding sales interval to trigger the SALE CLICK.

• • The value 1 must fall between -1000 and 3.9.
  • And the value 2 must fall between -1000 and 3.3.
  • And the value 3 must fall between -1000 and -0.3.
  • And the value 4 must fall between -1000 and 0.2.

Attention, please check that:

• For each interval, the value on the left must be less (but not strictly) than the value on the right.
• The buying and selling intervals for the same security do not overlap.

 

5. Step 5 : indicate the location of buy and sell clicks :

It is now a question of indicating to FNA where the click to buy should be made, if the conditions of PURCHASE are fulfilled or the click to sell, if all the conditions of SALE are fulfilled.

To do this, just place your mouse cursor on the spot where FNA will have to click and press:

• The key on your keyboard “p” to save the coordinates of the PURCHASE click.
• The key on your keyboard “s” to save the coordinates of the SALE click.

If the coordinates are not saved in FNA, click on the FNA window and try again.

 

6. Étape 6 : start monitoring :

Once you have checked all the steps, you can click on “START VALUE MONITORING”, which as the name suggests, activates data monitoring. All of your settings are then locked until the click is made or until you click on the same button (or on your space bar), which is now called “STOP MONITORING”.
Please note:

• your trading platform is in the foreground (buy and sell button visible) and not hidden by a window of another program. Otherwise, the click will not be able to perform correctly and open the position.
• to no longer use your computer so as not to disturb FNA (no longer touch the mouse or your keyboard and close unnecessary programs)
• if you detect an error in your configuration or if the conditions you have determined with your intervals have not been met, simply click on the same button which is now called “STOP MONITORING” to stop monitoring.

 

7. Additional functions :

1. Used to return to the home screen.
2. Used to get help. FNA will open this article to help you configure your software.
3. Used to cancel the previously chosen locations.
4. Used to close FNA.
5. Used to visually check the coordinates of the PURCHASE click (green cross) and the SALE CLICK (red cross).
6. To support me, you can click on the advertisement displayed and use the associated service. Of course, this is not mandatory.
   

 

Example of FNA configuration :

(Don’t forget to activate the subtitles)

video (coming soon)

We have come to the end of this tutorial, do not forget that you must absolutely train the software several times on a demo account before switching to a real account!

If you need more information, please let me know in a comment or on the Telegram FNA.

Good trades!

 

Trading is a risky activity and can lead to the total loss of your initial capital (and sometimes beyond)